Description

 

P3 makes a very sleek gauge that mounts in your left most vent. You can choose either the analog version or digital version (connects to your OBD2 port). 

 

Digital gauge kit features:

  • Plug and Play Install – plugs directly into your OBD2 port (want to keep your OBD2 port open? hard-wire harness kit also available)
  • OEM Integration – installs in your vent for a sleek install while retaining air flow
  • Versatility – read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
  • Code Reading/Clearing – read and clear diagnostic trouble codes (DTCs) on the fly

P3 V3 Digital Gauge Readouts

  • Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
  • Coolant temperature
  • Air/Fuel ratio (can be read in AFR or Lambda)
  • Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
  • Intake air temperature
  • Throttle angle
  • Ignition timing
  • Engine RPM
  • Exhaust gas temperature
  • Battery voltage
  • Programmable shift light
  • Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
  • Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
  • Acceleration timers (0-60mph/0-100mph/60-130mph)
  • Braking timers (60-0mph/100-0mph)

 

 

Analog gauge base features: 4 Available Analog Readouts 

  • Analog boost (yellow/purple/black – dedicated plug for analog boost sensor) *boost tap not included
  • Analog input 1 (brown wire – can read any 0-5 volt linear output sensor)
  • Analog input 2 (blue wire – can read any 0-5 volt linear output sensor)
  • Battery voltage (red wire / black wire – read through power and ground wires)
  • optional auto-dim feature (green wire – connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)

The P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.

Analog gauge base kit includes

  • Integrated display
  • Analog Box control unit
  • Main harness
  • Hard-wire harness
  • Analog boost sensor *boost tap not included
  • Approximately 5′ of 5/32″ O.D. boost tubing with 5/32″ I.D. hose at each end
  • 3 zip ties
  • 2 scotchlok wire taps

 

OEM Vent Option

Get the display mounted in an OEM vent for your vehicle to make your install even easier