GARRETT INTERCOOLER 2015+ ECOBOOST F150

$905.00

The Garrett® direct fit F150 charge air cooler boasts an 83% larger core than stock to provide an estimated 25 degree Fahrenheit reduction in air temperature and a 30% reduction in pressure drop.

Description

Garrett 2015+ V6-3.5L and 2.7L F-150

The Garrett direct fit F150 charge air cooler boasts an 83% larger core than stock to provide an estimated 25 degree Fahrenheit reduction in air temperature and a 30% reduction in pressure drop.

Construction:

  • Cast aluminum end tanks
  • Advanced offset fin design
  • TIG welded for improved strength
  • Vacuum brazed bar-and-plate design
  • 83% larger aluminum intercooler core
  • Up to 25 degree reduction in charge air temp

C.A.R.B. Approved:

Granted by the California Air Resource Board (C.A.R.B), executive order #D-794 allows the 870702-6001 direct fit performance charge air cooler to be used on specific emission controlled vehicles.

California is the only state that is permitted to issue emissions standards with an approval form the Environmental Protection Agency.

Obtaining a C.A.R.B certification identifies this intercooler will not increase vehicle emissions.

Installation

  • This direct fit performance charge air cooler installs in one and a half hours using basic hand tools
  • Reuses the factory hoses, clamps, bolts
  • Can be installed without removing the front bumper
  • Intercooler comes with a new screw for the blow off valve bracket

Drain Plug

The Garrett direct fit performance charge air cooler comes with a fully machined drain plug to relieve condensation buildup commonly found in the F150 platform. The bolt can be removed with a 3/8 open ended wrench.

Installers can test for condensation by turning the engine on, transmission in park, remove the bolt and place a catch can under the opening. Observe for any fluids. If fluid is present, gently rev the engine several times to dispel. Be sure to dispose of fluid with your local waste management facility.

PN: 870702-6001

C.A.R.B. EO# D-794

Supports up to 750 Horsepower

Drain plug to relieve condensation

 

Additional information

Weight 20 lbs
Dimensions 12 × 12 × 8 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.